Any mention of "us," "we," "our," etc is by Pro-Ject, not AV One.
Smooth sound and fine articulation
Affordable HiFi Sound
During our intensive research and development for our True Balanced turntables and phono stages, we realised the importance of MC cartridges for sound and mechanical perfection. Only with MC cartridges you can utilise the full technical benefits of a balanced connection in dynamic, sound stage and especially in the quietness of the sound.
Unfortunately, the production of MC cartridges is way more intensive and they are more costly compared to MM cartridges. Our goal is always to make true HiFi stereo affordable. The result was the Pick It MC2.
The very light stylus/coil assembly of a moving coil cartridge allows for a much wider frequency and improved transient response. This means a more detailed reproduction and resolution of low level signals.
The lower source impedance means less sensitivity to outer influences. This means less hum. However, due to the lower output (generally speaking around 20dB lower) a high quality phono stage is recommended.
Fresh and lively sound reproduction
This all new Pro-Ject Pick it MC2 cartridge uses an elliptical diamond mounted on alu cantilever which brings you a richer tone and more subtle details compared to the Pick it MC1.
With an MC cartridge you benefit from enhanced audio clarity, stereo imaging, and transparency compared to MM cartridges.
The enclosure is made of resonance optimised ABS which results in a total weight of around 5 grams. With its medium compliance it performs perfect with most entry to mid-level turntables.
Searching the best Japanese components in the most critical parts as diamond and cantilever, we have been able to source an excellent affordable motor which we build in our own designed and manufactured resonance free cabinet. After 1,5 years of fine-tuning and many listening and test phases, we are proud to offer now this great affordable MC cartridge.
Features
- Entry level Pick it MC cartridge
- Pro-Ject Audio cartridge design
- Elliptical diamond mounted on alu cantilever
- More detailed sound reproduction
- Improved frequency response
- Neodymium N40H magnet
- Square generator coil
- 6N OFC pure copper windings
- Musical all-purpose cartridge
- Genre allrounder
- 1/2-inch mounting standard
- Threaded holes for simple mounting without nuts
Technical Specifications
Cartridge principle: MC (Moving-Coil)
Output voltage at 1 kHz: 0,4 mV (3,54 cm/sec)
Channel separation at 1 kHz: >27 dB
Tracking ability at 315Hz: 70 μm
Dynamic compliance: 15 μm/mN
Frequency response: 20 - 20 000 Hz +/- 1dB
Stylus type: Elliptical on alu cantilever
Tracking force, range: 1,7 - 2,1 g (mN)
Tracking force, recommended: 1,9 g (mN)
Height stylus tip to top mounting surface: 17 mm
Tracking angle: 22°
Recommended load resistance: 50-200 Ω
Cartridge weight: 5 g
